Wedge nutswith zinc/yellow plated finish. also known as
V nuts as the are placed in the V channel of hollow ribbed decking, the have tapped
gole to accept threaded rods/bolts. Available in sizes to suit M6, M8, M10 and M12.

Also available in mini wedge nuts and mini-mini wedge nuts.

Studding connectors with a bright zinc plated finish, are
threaded all the way through and are used to connect two lenghts of studding. Available in sizes
M6 x 28 mm up to M24 x 72mm.

Purlin Clips are designed for the suspensions of threaded
rod from purlin section. available in M10.

Flange Clamps, also known as universal beam
clamps or G clamps are used for suspending building services from
steel beams. They provide a solid fixting without the need for welding or drilling. Available in
sizes M8, M10 and M12.

Overhead tray hangers are used for suspending
lenghts of cable tray. Available to suit widths of 75mm, 100mm, 150mm, 225mm
and 300mm cable tray. Pre galvanised finish.

This hangers have a single fixting point for suspending
from theaded rod or fixting directly to the celling. They allow for side mounting of the cables for
ease of installation.

G hangers are used for suspending lenghts of cable
tray. Available to suit widths of 75mm, 100mm, 150mm, 225mm and 300mm
cable tray. Pre galvanised finish.

This hangers have a single fixting point for suspending
from theaded rod or fixting directly to the celling. They allow for side mounting of the cables for
ease of installation.

Stand-off brackets for cable tray, 25 mm stand-off for tray up to
300mm wide. M6 captive nuts for easy fixing. Strongly made
brackets in bright zing plated finish. The captive nuts can slide to correspond with the slots in
the cable tray and eliminate the need to access the rear of the tray.

50 mm heavy duty wrap-over copulers used for joining two
lenghts of cable tray. Available in hot dip galvanised or pre galvanised finishes.

Heavy duty backplatecan be used for secuting pipeworks to
walls and cellings.

Ball swivel hanger, for use with unlined and lined pipe
clips and hanging brackets to reduce drop rod lateral loads.

Available in a size of M10 x 30mm with BZP finish..

A popular product used in drop rod suspensions to allow for movement of
pipes in all horizontal planes. In addition they also allow for a degree of height adjustement in
the suspension.

Bossed backplates can be used in conjuction with M8 and
M10 studding or male munsen rings for secuting pipeworks to walls and cellings.

Available in dual M8 / M10, M8 e M10